Automatic Feeding Wire Mesh Welding Machine For 3D Mesh Panel
Product description
Function features: Servo motor pull mesh panel.
1. This wire mesh welding machine adopts synchronous control
technique. The center-control and welding time are composed of
Panasonic PLC program system. The input front-panel has two forms,
touch screen and keyboard that makes the machine more intelligent
and reasonable and it could press at one time, times welding.
2. The cross wire will be fed automatically with the help of a
stepper motor. Falling wire automatically. The machine stops
automatically if cross wires are used up in the hopper.
3. The line wire and the cross wire are pre-straightened and
pre-cut. The greatest advantage is that you can adjust the distance
of cross wire at random on the same one mesh panel.For example,
50x100, 50x150, 50x200, 50x250, 50x300 in one mesh panel.
4. Mesh pulling system is controlled by servo-motor that adopts
elastic tension and opening positioning mesh, which improves the
precision of mesh opening size.
5. Wire feeding way: The longitudinal wires and cross wires should
be pre-straightened and pre-cut. The longitudinal wires should be
inserted into the slot tunnel by manual work or inserted into the
wire feeding car first, then send to the down wire mesh welding
machine by Panasonic servo motor.
6. Welding time and welding current are regulated separately. It is
easy to establish when the diameter of the wire is changed.
7. The power transformer must be at least 160KVA, and the maximum
distance between the power transformer and the machine must be 80
m.
8. Material:Suitable for low carbon iron wire, ribbed wire, cold
drawn wire, galvanized wire.
Technical parameter
| Wire diameter | 3.0--6.0mm | Line wire form | Pre-cut wire |
| Line wire distance | 50--300mm(adjustable) | Weft wire form | Pre-cut wire |
| Cross wire distance | 50--300mm(adjustable) | Rated voltage | 380V 50HZ |
| Welding net width | 3m | Welding transformer | 125KVAx8PCS |
| Welding speed | 45--60 times/min | Panel mesh Length | Max 6m |
| Welding spots | 30 | Overall dimension | 9m*3.2m*1.7m(L*W*H) |
| Machine weight | 3.9T | Motor power | 7.5 KW |
| Workshop | 16m*5m*4m(L*W*H) | Power supply | at least 160KVA |
Linear wire feeding
1. A device for feeding a linear wire.
2. Transformer: 8 * 125KVA (Water-cooling)
3. Welding time and welding current are regulated separately. It is
easy to establish when the diameter of the wire is changed.
Cross wire feed
1. Transverse wires, pre-straightened and cut
2. The cross-wires controlled by the stepper motor are fed
automatically.
Welding part
1. Special copper with a long service life and high conductivity
2. Welding electrodes: 30 pcs.
3. The pitch of the wire line is 50-300 mm
Stretching the grid
1. The pitch of the transverse wire is set via the PLC
2. The cell size may vary from 50 mm to 300 mm.
3. The maximum length of the grid is 6 m.
